NEC ELECTRA ELITE IPK II, User Manual

Page: 337 / 1190

Electra Elite IPK II Document Revision 4C
Digital Voice Mail 2 - 313
Assign Trunks As Automated Attendant Trunks – Method 2

22-02-01 Incoming Call Trunk Setup
Assign Service Type 0 to each trunk you want to ring into Voice Mail as a normal line.

22-04-01 Incoming Extension Ring Group Assignment
Assign Ring Group 102 for an In-Skin/External Voice Mail, or 103 for a Central Voice Mail as the
destination.
For Either Method:

11-12-42 Service Code Setup (for Service Access) – Flash on Trunk Lines
Program the dial access code to use for sending a hook flash to Telco. This code is used for
Centrex Transfer using Digital Voice Mail ports. If this code starts with
# , PRG 45-01-05 must be
set to 0.

22-04-01 Incoming Extension Ring Group Assignment
To enable Voice Mail Overflow, assign selected extensions to a Ring Group that rings for
unanswered DILs to Voice Mail ports. In Program 22-06, enter 1 to enable overflow ringing.

22-08-01 DIL/IRG No Answer Destination
For Voice Mail Overflow, enter the Ring Group that unanswered DILs to Voice Mail rings after
the DIL Call Waiting time (Program 22-01-04).

24-02-03 System Options for Transfer – Delayed Call Forwarding Time
Set the time a transferred call waits at a forwarded extension before routing to the called
extension mailbox.

45-01-01 Voice Mail Integration Options – Voice Mail Department Group Number
Assign which Extension (Department) Group number is to be assigned as the voice mail group.
This program defines the Quick Transfer to Voice Mail destination. If set to 0, no voice mail is
installed.
Department Groups: 0, 1~64

45-01-02 Voice Mail Integration Options – Voice Mail Master Name
Enter the Voice Mail master name up to 12 characters.

45-01-05 Voice Mail Integration Options – Message Wait
When using Centrex Transfer From a voice mail port, the following items must be considered:

If the Feature Access Code starts with
#
, set PRG 45-01-05 to Off.

When assigning the dial string in voice mail, one or more Pauses may be needed too, depending
on what Telco needs.

45-01-06 Voice Mail Integration Options – Record Alert Tone Interval Time
Set the time (0~64800 seconds) between Voice Mail Conversation Record alerts.