NEC ELECTRA ELITE IPK II, User Manual

Page: 200 / 1190

Document Revision 4C Electra Elite IPK II
2 - 176 Caller ID

20-09-04 Class of Service Options (Incoming Call Service) – Notification for Incoming Call List
Existence
Determine whether or not the CHECK LIST message is displayed to indicate a missed call
(0 = Off, 1 = On).

20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension user to manually (0) or automatically (1) receive off-hook signals.

20-19-01 System Options for Caller ID – Caller ID Displaying Format
Determine whether the first 10 digits (0) or last 10 digits (1) should be displayed when Caller ID
exceeds 12 digits.

20-19-02 System Options for Caller ID – Caller ID Wait Timer
Determine the time an incoming CO call should wait for Caller ID information from Telco before
the system connects the call.

20-19-05 System ID Options for Caller ID – Caller ID Sender Queuing Time (Sender Wait)
With the Caller ID Sender Queuing option, determine the time an incoming call waits in queue
for a DSP resource to become available (0~64800 seconds). If a resource becomes available
during this time, the call immediately rings the single line telephone with Caller ID. If the time
expires before a resource becomes available, the system rings the single line telephone without
Caller ID (until the queuing time expires, the single line telephone does not ring). If the queuing
timer is set to 0, the system does not queue the incoming call.

20-20-01 Message Setup for Non-Caller ID Data – Private Call
Enter the text (up to 24 alphanumeric characters) to be displayed for Caller ID when a user
receives a call which is classified as a private call.

20-20-02 Message Setup for Non-Caller ID Data – Call from Out of Service Area
Enter the text (up to 24 alphanumeric characters) to be displayed for Caller ID when a user
receives a call which is classified as an out-of-service area call.

20-20-03 Message Setup for Non-Caller ID Data – Call Information with Error
Enter the text (up to 24 alphanumeric characters) to be displayed for Caller ID when a user
receives a call which is classified as a call with a CID error.

90-03-01 Save Data
Save the programmed data on the SRAM and Flash ROM to the Removable Compact Flash
Memory.

90-04-01 Load Data
Load the data from inserted Compact Flash Memory to SRAM and Flash ROM.