NEC ELECTRA ELITE IPK II, User Manual

Page: 929 / 1190

Electra Elite IPK II Document Revision 4C
Speed Dial – System/Group/Station 2 - 905
7. Press Hold .
8. Press Speaker to hang up or repeat steps 3~7 to program another System or Group Speed Dial
bin.
To dial a System Speed Dialing number:
1. Go off-hook.
2. Press Redial .
3. Dial the System Speed Dialing storage code.

Unless you preselect, Trunk Group Routing selects the trunk for the call. The system may optionally select a
specific Trunk Group for the call.

If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
To store a System Speed Dialing number under a Programmable Function Key:
1. At multiline terminal, press Speaker .
2. Dial 751 .
3. Press the key where the number is to be stored.
4. Dial 27 .
5. Dial System Speed Dial Bin number to put under the key.
6. Press Speaker to hang up.
To dial a System Speed Dialing number under a Programmable Function Key:
1. At the multiline terminal, press Speaker .
2. Press the key, which has the stored number to be dialed.

The number seizes an outside line and dials out.
#
# = Accepts an entry (only required if two letters on the same key are needed – ex:
TOM). Pressing # again = Space. (In system programming mode, use the right
arrow Softkey instead to accept and/or add a space.)
CONF Clear the character entry one character at a time.
HOLD Clear all the entries from the point of the flashing cursor and to the right.
Table 2-33 Keys for Entering Names
Use this keypad digit . . . When you want to. . .