NEC ELECTRA ELITE IPK II, User Manual

Page: 1177 / 1190

Electra Elite IPK II Document Revision 4C
Codes Tables 3 - 33
Code: 38
Operation: Leave
message: Call ext +
Press key OR
Answer message:
Press key
Message Waiting Answer/Leave a
Message Waiting
None

0
or
0
Code: 39
Operation: Press
key at destination
and ext
Room Monitor Activate Room Monitor Fast Flash red at
destination, Hold
Flash red at source
-
Code: 40
Operation: Press
key
Handset Cutoff Cut off the handset
transmission while on a call
On when feature
active (no
transmission on
handset)
-
Code: 41 + sec. ext.
Operation: Press
key
Secretary Call Call your secretary (using the
buzzer)
On red at source
Fast Flash red at
destination
-
Code: 42 + boss
ext.
Operation: Press
key
Are a secretary picking up a
call ringing your boss’s
extension.
On red when
activated
-
Code: 43
Operation: TRK call
+ Hold + ext + Press
key
Serial Call Place a Serial Call to a
co-worker
None -
Code: 44
Operation: Place or
answer call + Press
key
Hold Put a call on System Hold (if
hold key is reassigned)
None -
Code: 45
Operation: Place or
answer call + Press
key
Put a call on Exclusive Hold None -
Code: 46
Operation: Press
key
Department Calling Log in or log out of your
Department Calling Group
On when removed,
Off when installed
150
Code: 47 + dest.
ext.
Operation: Press
and hold key
Reverse Voice Over Initiate Reverse Voice Over Full BLF red -
Code: 48
Operation: Hear
Off-Hook Signaling
tones + Press key
Voice Over Initiate or respond to Voice
Over
On red when
responding Hold
Flash red when
listening
790
Table 3-5 Function Key Codes by Number (Continued)
To program a key, press Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
press the key and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you... Key Lamp Status
Also see
Srvc Code