NEC ELECTRA ELITE IPK II, User Manual

Page: 196 / 1190

Document Revision 4C Electra Elite IPK II
2 - 172 Caller ID
Option Available for FSK or DTMF Type from Analog Trunk
An option (Program 14-02-16) is available for the Caller ID which allows you to select the type of Caller
ID signal from an analog trunk – FSK or DTMF.
Conditions

To have pre-answer Caller ID from the voice mail, the call must be an unscreened transfer.

Caller ID is provided by the CPUII. The DSPII daughter board, which plugs onto the CPUII,
can provide additional resources for Caller ID if needed.

Caller ID Name can display up to 12 characters.

Caller ID Number can display up to 11 characters.

A Caller ID Number with more than 12 digits follows PRG 20-19-01 (first 10 or the last 10
digits).

Caller ID information can be stored in Speed Dialing or One-Touch bins.

Caller ID can be displayed for incoming calls and transferred calls.

ARS can block outgoing Caller ID information call-by-call. To do this, insert the Caller ID
block code (e.g., .67) in the ARS Dial Treatments.

Trunks with Privacy Release enabled display Caller ID until the call is answered. To view it
after the call is picked up, press the line key, which sets the call to private mode. To keep
the call on Privacy Release, press the Help + Exit keys.

An extension user can display the Caller ID information for a call in Park if Automatic
Handsfree in PRG 15-02-08 is set to 0 (Preselect).

An extension user can display the Caller ID information for multiple incoming calls without
answering the call by pressing the line key if Automatic Handsfree in Program 15-02-08 is
set to 0 (Preselect).

Caller ID information outputs on the SMDR report.

ANI/DNIS can use the Caller ID tables for routing. Refer to T1 Trunking (with ANI/DNIS
Compatibility) on page 2-941 for more information.

The system can send Caller ID digits to the voice mail if allowed in PRG 14-02-10.

When more than 20 characters are set in PRG 20-20 : Message Setup for Non-Caller ID
Data, either the first or last character is missing (based on the entry in PRG 20-19-01).

If Program 20-09-06 : Class of Service Options (Incoming Call Service ) : Incoming Time
Display is set to 1 (On), the first line displays the time and date.

When you shut down the system, incoming history data is cleared. But you can press
Speaker +
#

#
9 to back up the history data.