NEC ELECTRA ELITE IPK II, User Manual

Page: 71 / 1190

Electra Elite IPK II Document Revision 4C
Analog Communications Interface (ACI) 2 - 47
Physical Ports and Software Ports
Each PGD(2)-U10 ADP consists of a physical port for connection to the telephone system and two logical
ports. For programming, the ports are also called software ports. The physical port connects to a station
position on a ESI ETU. During installation, the first PGD(2)-U10 ADP you set up is physical port 1; the
second PGD(2)-U10 ADP is physical port 2, etc. Each PGD(2)-U10 ADP has two software ports, which
are numbered independently of the physical ports. Normally, the first PGD(2)-U10 ADP set up has
software ports 1~2; the second PGD(2)-U10 ADP has software ports 3~4, etc. There are a total of 96
software ports (48 PGD(2)-U10 ADPs x 2 ports each). During programming, you assign ACI extension
numbers and Department Group options to PGD(2)-U10 ADP software ports, not physical ports. During
installation, you connect equipment to the jacks on the PGD(2)-U10 ADP that correspond to the software
port.
Refer to the Electra Elite IPK II System Hardware Manual for installation details.
Conditions

ACD agents who are logged on can be recorded.

ACI software ports cannot be Background Music music sources.

An extension cannot have Hotline keys for ACI software ports. Music on Hold ACI software
ports can be Music on Hold music sources.

An extension can have One-Touch Keys for ACI software ports. The gives the extension
user:

One-Touch access to external music

One-Touch External Paging

One-Touch loud ringer control

ACI software ports can provide External Paging with control, independent of the External
Paging circuits on the CPUII ETU. The PGD(2)-U10 ADP can be connected only to an
ESIB(8)-U20 ETU. If the PGD(2)-U10 ADP is connected to an ESIE(8)-U20 ETU, the
PGD(2)-U10 ADP is NOT recognized.

When an ESIB(8)-U20 ETU has an ESIE(8)-U20 ETU installed [ESIB/E(16)], the
PGD(2)-U10 ADP has both channels available for Paging, MOH, External Ringers, and
Door Box according to strapping on ports 1~8. The corresponding port on the ESIE(8)-U20
ETU does not support a station or other hardware (it is used by the PGD(2)-U10 ADP for
channel 2).

When an ESIB(8)-U20 ETU is installed without an ESIE(8)-U20 ETU installed, a
PGD(2)-U10 ADP installed on ports 1~8 is recognized, but only Channel 1 on the
PGD(2)-U10 ADP is supported. Channel 2 is not available.

ESIE(8)-U10 ETUs and ESIE(8)-U10 ETUs do not support the PGD(2)-U10 ADP.