NEC ELECTRA ELITE IPK II, User Manual

Page: 1170 / 1190

Document Revision 4C Electra Elite IPK II
3 - 26 Codes Tables
Do Not Disturb/Call
Forward Override
Code: 37
Operation: Press key
Call an extension which is in
DND or Call Forwarded None -
General Purpose
Relay
Code: 51 + relay number
Operation: Press key
Activate the general purpose
relay On when active 780
Group Call Pickup Code: 24
Operation: Speaker key
+
Press key
Answer a call ringing another
telephone in your Pickup
Group None

#
Code: 25
Operation: Speaker key
+
Press key
Answer a call ringing a
telephone in another Pickup
Group – if you do not know
the group number None 769
Code: 26 + Pickup Group
(1~8 or 1~9 or 01~64)
Operation: Speaker key
+ Press key + Pkup
Group
Answer a call ringing a
telephone in a specific Pickup
Group None 768
Handset Cutoff Code: 40
Operation: Press key
Cut off the handset
transmission while on a call On when feature
active (no
transmission on
handset)
-
Hotline Code: 01 + dest. ext
Operation: Press key
Place a call to your Hotline
partner Full BLF (red) for
covered ext.
-
Headset Operation Code: 05
Operation: Press key
Enable or disable
Headset Operation On red when
activated
834
Hold Code: 44
Operation: Place or
answer call + Press key
Put a call on System Hold (if
your telephone Hold key is
reassigned) None -
Code: 45
Operation: Place or
answer call + Press key
Put a call on Exclusive Hold None -
Meet Me
Conference
(Also see
Conference)
Code: 32
Operation: Press key
Join a Meet Me Conference None 763 or 764
Table 3-4 Function Key Codes by Feature (Continued)
To program a key, press the Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
press the key and enter the code (e.g., 48 for Voice Over).
For this feature... Use this key... When you... Key Lamp Status
Also See
Srvc Code