NEC ELECTRA ELITE IPK II, User Manual

Page: 461 / 1190

Electra Elite IPK II Document Revision 4C
Elite CallAnalyst 2 - 437

For example, if trunk port 049 has a trunk name of PRI Ch1, if Program 35-02-03 = 0 (name) and
PRG 35-02-14 = 1 (display date), then SMDR shows 8/19 049. However, if Program 35-02-14 = 0
(date not displayed), the SMDR shows PRI Ch1.

For proper handling of DNIS calls, the name field (Program 22-11-03) must be the same as the
received DNIS digits (Program 22-11-01). If this is not set, CallAnalyst cannot track transferred
calls since the system displays the DNIS number when a call is received and displays the DNIS
name for transferred calls. This setting has no impact on outgoing calls, which display the trunk
name instead of the DNIS name.

Caller ID name can be displayed in SMDR records. Program 35-02-17 must be set to 0 and
Program 35-02-18 set to 1.

14-01-06 Basic Trunk Data Setup – SMDR Printout
Have the system include (1) or exclude (0) the trunk being programmed for the SMDR printout.

15-01-03 Basic Extension Data Setup – SMDR Printout
For each extension, enter 1 if an extension call should appear on the SMDR report. Enter 0 for
the extension if the calls should not appear.

35-01-01 SMDR Options – Output Port Type
Specify the type of connection used for SMDR
0 = No Setting (default)
1 = CPUII ( )-( ) COM Port 1
3 = LAN,
4 = CTA
The baud rate for the serial COM port should be set in PRG 10-21-02 or PRG 15-02-19.

35-01-02 SMDR Options – Output Destination Number
Specify (up to 8 digits) the SMDR printer output extension (CTA/CTU extension number).
Default is No Setting

35-01-03 SMDR Options – Header Language
Specify the language in which the SMDR header should be printed.
0 = English (default)
1 = German
2 = French
3 = Italian
4 = Spanish.
Set this entry to 0 for Elite CallAnalyst.

35-01-04 SMDR Options – Omit Digits
The number of digits entered for this option do not print on the SMDR Report (0~24). For
example, if the entry is 10, the first 10 digits a user dials do not appear on the SMDR report.

35-01-05 SMDR Options – Minimum Digits
Outgoing calls must be at least this number of digits (0~24) for inclusion in the SMDR report.
Default is 0.