NEC ELECTRA ELITE IPK II, User Manual

Page: 689 / 1190

Electra Elite IPK II Document Revision 4C
K-CCIS – IP with PVA 2 - 665
PVA Combo Card Service Conditions

Version 2000 or higher is required to support the PVA Combo Card Application.

If changing packages on the PVA (for example K-CCIS to Combo), the previous card type
must be deleted from the slot in Program 90-05. Even if both are the same physical card,
PVA, the system sees them differently.

The PVA Combo Card (MG_CCIS ETU) Application can support 24 DSP resources which
may be configured to support the MG16 or the CCISoIP application.

The PVA Combo Card CCISoIP Trunks and SIP Trunks Logical Port Numbers are
determined by the following:

SIP Trunks

PVA(X)-U( ) ETU License Registration

SIP Client License Registration

Elite IPK II Program 10-41-01 SIP Trunk Availability

Elite IPK II Program 10-40-02 Number of SIP Ports

CCISoIP Trunks

PVA(X)-U( ) ETU License Registration

Elite IPK II Program 10-40-03 CCISoIP Trunk Availability

Elite IPK II Program 10-40-04 Number of CCISoIP Ports

The maximum number of Logical Trunk Ports is 48 ports per PVA Combo Card package

The PVA(X)-U( ) ETU with PVA Combo Card Application may configure DSP usage criteria
with Elite IPK II Program 10-19-01 DSP Resources. Each VoIP ETU can flag individual
DSP resources as:

IP Ext – IP Extensions (includes MEGACO Station or SIP Stations)

SIP Trk – SIP Trunks

CCIS – CCIS Networking

Common – Common usage for CCIS Networking, SIP Station, MEGACO Stations, SIP Trunks

PVA Combo Card CCISoIP Application supports trunks configured in increments of four
contiguous DSP resources.

ETU Configuration – The PVA Combo Card Application package is identified as a
MG_CCIS ETU.

The PVA Combo Card – VoIP ETU supports up to 200 CCIS Logical Trunks and 200 SIP
Logical Trunk Port Numbers (read only).

IP Application DSP Resource configuration:

CCIS Trunks are defined as CCIS or Common

IP MEGACO Stations are defined as IP Ext or Common