NEC ELECTRA ELITE IPK II, User Manual

Page: 930 / 1190

Document Revision 4C Electra Elite IPK II
2 - 906 Speed Dial – System/Group/Station
To dial a Group Speed Dialing number:
1. Go off-hook.
2. Press Redial .
- OR -
3. Press the Group Speed Dialing key (PRG 15-07-01 or SC 751: 28).

To preselect, press a line key in step 1 (instead of Speaker ) before pressing Redial or Speed Dialing key.
4. Dial the Group Speed Dialing code.

The stored number dials out.

Unless you preselect, Trunk Group Routing selects the trunk for the call.

If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
To check your stored Speed Dialing numbers (display telephone only):
1. Press the Help key.
2. For System Speed Dialing, press Redial .
Dial the Speed Dialing Code (e.g., common code 001 ).

If the entire stored number is too long for your telephone’s display, press

to see the rest of the number.
- OR -
For Group Speed Dialing, press the Group Speed Dialing key.
- OR -
For System Speed Dialing key, press the System Speed Dialing key.
3. Press the Exit key.

To display additional numbers, repeat from step 1.
To store a Station Speed Dialing number (display telephones only):
1. Press Speaker .
2. Dial 755 .
3. Dial the Station Speed Dial buffer number to be programmed ( 0 ~ 9 ).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
" " " " " "
0 = Station Speed Dial buffer 10
4. Dial the telephone number you want to store (up to 24 digits).

Valid entries are 0~9, # and

. To enter a pause, press MIC. To store a Flash, press Recall.
5. Press Hold .