NEC ELECTRA ELITE IPK II, User Manual

Page: 630 / 1190

Document Revision 4C Electra Elite IPK II
2 - 606 IPK II In-Mail

41-19-06 ACD Voice Mail Delay Announcement – Wait Tone Type at Message Interval . Version 2000
or higher is required.
Options
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
(default: 0)

41-19-07 ACD Voice Mail Delay Announcement – ACD Forced Disconnect Time after 2nd
Announcement
.
Assign the time the system should wait after the end of the ACD delay message before
disconnecting.
Version 2000 or higher is required.
Options
0 ~ 64800 seconds
(default: 0)

41-19-08 ACD Voice Mail Delay Announcement – Delayed Message Interval Time .
Set the time between the Delayed Messages.
Options
0 ~ 64800 seconds
(default: 20)

47-03-01 IPK II In-Mail Master Mailbox Options – Master Mailbox Active
Enable (1)/Disable (0) the Master Mailbox. A Master Mailbox is not accessible when it is
disabled.
(default: 0)

47-03-02 IPK II In-Mail Master Mailbox Options – Master Mailbox Number
The Master Mailbox Number is the same as the Department Group master (pilot) number.
Select the Department Group master (pilot) number associated with the Master Mailbox you are
programming.
Options
Digits (seven maximum, using 0~9)
No Setting (entered by pressing Hold)
(default: No Setting)

47-03-03 IPK II In-Mail Master Mailbox Options – Master Mailbox Type
Set the Master Mailbox type. There are four types of Electra Elite IPK II In-Mail mailboxes: Call
Routing boxes are used for ACD Delay Announcements.
Options
0 - Undefined
1 - Call Routing
2 - Announcement
3 - Subscriber
4 - Directory
(default: 0)