NEC ELECTRA ELITE IPK II, User Manual

Page: 1078 / 1190

Document Revision 4C Electra Elite IPK II
2 - 1054 Virtual Extensions

15-10-01 Virtual Incoming Extension Ring Tone Order Setup
Set the priority (1~4) for the Virtual Extensions’ Ring Tones set in Program 15-08-01. When
simultaneous Virtual Extension calls ring an extension, the tone with the highest priority (e.g., 1)
rings and the other keys just flash.
(default: Order 1~4 = Tone 0~3)

15-11-01 Virtual Extension Delayed Ring Assignment
Individually program an extension Virtual Extension key(s) for Delayed Ringing (1) or Immediate
Ringing (0).
(default: 0)

15-18-01 Virtual Extension Key Enhanced Options – Virtual Extension Key Operation Mode
Assign if a call to a VE Holds (1) on the VE or Release (0) to the phone that answered the VE.
(default: 0)

15-18-02 Virtual Extension Key Enhanced Options – Display Mode when pacing a call on Virtual
Extension Key
Assign if the phone displays the extension name of the Virtual Extension (0) or the Real
Extension (1) when making call from the Virtual Extension. PRG 15-02-21 must be set to OTG
(1).
(default: 0)

20-04-03 System Options for Virtual Extensions – CAR/SIE/Virtual Extension Delay Interval
Assign the Delay Ring Time (0~64800 seconds) for Virtual Extensions.
(default: 10)

20-06-01 Class of Service for Extensions
Assign the Extension to a Class of Service.

20-07-10 Class of Service Options (Administrator Level) – Programmable Function Key
Programming (Appearance Level)
Tun Off (0) or On (1) programming of Appearance Function keys using default service code 752
(default: 1).

20-10-08 Class of Service Options (Answer Service) – Virtual Extension Off-Hook Answer
Determine if the extension Class of Service answers (1) or not answers (0) when the extension
goes off-hook.
(default: 1)

20-13-27 Class of Service Options (Supplementary Service) – Busy on Seizing Virtual Extension
Enable (1)/Disable (0) the ability to call a busy extension which is talking on a virtual extension
key. Program 20-13-06 (Call Waiting) must be set to off for this option to work.
(default: 1)

21-01-15 System Options for Outgoing Calls – Outgoing Disable on Incoming Line (Toll
Restriction)
Enable (1)/Disable (0) the Outgoing Disable on Incoming Line feature.
(default: 0)