NEC ELECTRA ELITE IPK II, User Manual

Page: 823 / 1190

Electra Elite IPK II Document Revision 4C
PC Programming 2 - 799
Required Component(s)
Each copy of installed PC Programming requires a license.
Related Features
None
Programming

10-12-01 CPUII Network Setup – IP Address
Assign the CPU IP address if PC Programming is required via LAN. This program item must be
set if WebPro access is required.

10-12-02 CPUII Network Setup – Subnet Mask
Assign the CPU Sub Net Mask address if PC Programming is required via LAN. This program
item must be set if WebPro access is required.

10-12-03 CPUII Network Setup – Default Gateway
Assign the CPU Gateway address if PC Programming is required via LAN. This program item
must be set if WebPro access is required.

10-21-02 CPUII Hardware Setup – Baud rate for COM Port
Assign the Baud rate for COM Port 1 (Side of KSU) COM 1, (Default 2, 19200). If a direct or
remote (modem) connection is required via PC Programming this program must be set.

11-15-14 Service Code Setup, Administrative (For Special Access) – Modem Access
Assign the service code to be used to access the internal modem on the CPUII.

22-02-01 Incoming Call Trunk Setup
Define the service type for the trunk intended to access the internal modem as 4:DIL.

22-07-01 DIL Assignment
Assign the Modem Access service code set in PRG 11-15-14 as the destination extension for
the DIL trunk for modem access.

90-02 Programming Password Setup
Configure the administrator accounts that are used when connecting to the KTS via PCPro/
WebPro
If using PCPro, these are the accounts used to
connect .
If using WebPro, these are the accounts that are used to login.

If calls are answered by an Auto attendant first, instead of the DIL setup on PRG 22-01 and PRG 22-07,
set the transfer destination in the Auto Attendant to the Modem Access Service Code.