NEC ELECTRA ELITE IPK II, User Manual

Page: 881 / 1190

Electra Elite IPK II Document Revision 4C
Room Monitor 2 - 857
Programming

11-14-17 Service Code Setup (for Hotel) – Hotel Room Monitor
Customize the service code (675 by default) to be used for Room Monitor.

15-07-01 Programmable Function Keys
Assign a function key as a Room Monitor key (code 39) for both the extension being monitored
and the extension initiating Room Monitor.

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.

20-13-11 Class of Service Options (Supplementary Service) – Room Monitor, Initiating Extension
Enable (1)/Disable (0 an extension user ability to initiate Room Monitor.
(default: 0)

20-13-12 Class of Service Options (Supplementary Service) – Room Monitor, Extension Being
Monitored
Enable (1)/Disable (0 an extension user ability to be monitored.
(default: 0)

42-03-12 Class of Service Options (Hotel/Motel) – SLT Room Monitor
Enable (1)/Disable (0) a single line telephone user ability to use Room Monitor.
(default: 0)
Operation
 You must activate Room Monitor at the extension initiating the monitor and at the extension you want to
monitor. You can only listen to one extension at a time.
Multiline Terminals:
To activate Room Monitor from an idle Multiline Terminal (initiating extension):
1. Press the Room Monitor key (PRG 15-07 or SC 751: 39).
2. Dial the number of extension you want to monitor.

You can place and answer other calls while Room Monitor is active.
To activate Room Monitor from an idle Multiline Terminal (extension to be monitored):
1. Press Room Monitor key (PRG 15-07 or SC 751: 39).
2. Dial the number of the extension where you are located.

For example, if you are at extension 106, dial 106.

You can place and answer other calls while Room Monitor is active.