NEC ELECTRA ELITE IPK II, User Manual

Page: 255 / 1190

Electra Elite IPK II Document Revision 4C
Code Restriction 2 - 231
Code Restriction
Description
Code Restriction limits the numbers an extension user may dial. By allowing extensions to place only
certain types of calls, you can better control long distance costs. The system applies Code Restriction
according to the Code Restriction Class.
The system allows for up to 15 Code Restriction Classes and
416 extensions
.
Conditions

If a Code Restriction Class has the same entries in both a permit and restriction table, the
system does not restrict the call.

Code Call Digit counting may prevent users from taking advantage of long distance
automated services like ACD and automated Technical Service.

Code Restriction is applied when accessing ARS.

If Program 21-01-10 is set to other than 0, a call cannot have a talk path unless the user
dials at least the number of digits entered in this option when placing an out going call. This
means an entry of 4 or higher in this program causes a problem when dialing 911. Since it
is only a 3-digit number, the call does not have a talk path, preventing the emergency
dispatcher from hearing the caller. This option should be kept at its default setting of 0 to
prevent any problem with dialing 911.

Common Permit Code Table
Use the Common Permit Code Table when you have numbers you want all Code
Restriction Classes to dial. To let all users dial 911, for example, put 911 in the Common
Permit Code Table. The Common Permit Code Table overrides the Restrict Code and
Common Restrict Code Tables. The system provides 10 tables, with 10 entries in each
table. Each code is four digits maximum, using 0~9,
#
,

and Recall (as a wild card).

Common Restrict Code Table
The Common Restrict Code Table lets you globally restrict certain numbers for all Code
Restriction Classes. To prevent all users from dialing directory assistance (411), for
example, put 411 in the Common Restrict Code Table. Be sure you do not allow the codes
you want to restrict in the Permit Code Table or the Common Permit Code Table. The
system provides 10 tables, with 10 entries in each table. Each code is four digits maximum,
using 0~9,
#
,

and Recall (as a wild card).