NEC ELECTRA ELITE IPK II, User Manual

Page: 171 / 1190

Electra Elite IPK II Document Revision 4C
Call Forwarding – Park and Page 2 - 147

31-03-01 Internal Paging Group Settings – Internal Paging Group Name
Assign names to Internal Paging Groups (i.e., Page Zones). The system shows the names you
program on the telephone displays.

31-04-01 External Paging Zone Group – Paging Group Number
A ssign each External Paging Speaker to an External Paging Zone.

31-06-01 External Speaker Control – Broadcast Splash Tone Before Paging (Paging Start Tone)
Enable (1)/Disable (0) splash tone before Paging over an external zone. If enabled, the system
broadcasts a splash tone before the External Paging announcement.

The paging chime overrides the first four seconds of the announcement. Allow a delay in announcement
recording for chime time.

31-06-02 External Speaker Control – Broadcast Splash Tone After Paging (Paging End Time)
Enable (1)/Disable (0) splash tone after Paging over an external zone. If enabled, the system
broadcasts a splash tone at the end of an External Paging announcement.

40-10-01 Voice Announcement Service Option – VRS Fixed Message
Enable (1)/Disable (0) the system ability to play the fixed VRS messages (such as “You have a
message.”).

40-10-05 Voice Announcement Service Option – Park and Page Repeat Timer (VRS Msg Resend)
If a Park and Page is not picked up in this time, the Paging announcement repeats.
Operation
To have the system page you when you have a call:
1. Press Speaker (or lift the handset at the single line telephone) and dial 713 .
2. When you hear, “Please start recording,” record you Personal Greeting.

If you already have Park and Page or Personal Greeting set up, you can dial:
3 to erase (the optionally HOLD to cancel the erase)
5 to listen (then
#
again to listen again)
7 to re-record
3. Dial
#
7 .
4. When you hear, “Please start recording,” record your page and dial
#
when the announcement is
complete.

A paging chime overrides the first four seconds of an announcement. Allow a delay in announcement recording
for chime time.
5. Dial the Page Zone that should broadcast your announcement.
For example, for Internal Zone 1 dial 701 + 1, or for Combined Paging Zone, 1 dial

1 + 1.