NEC ELECTRA ELITE IPK II, User Manual

Page: 41 / 1190

Electra Elite IPK II Document Revision 4C
Account Code Entry 2 - 17
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.

If Account Codes for Incoming Calls is disabled, the following steps dial digits out onto the connected trunk.
2. Dial

.
3. Enter the Account Code.

You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial

.
To enter an Account Code while placing a trunk call:
If your system has Forced Account Codes, you must follow this procedure.
1. Access trunk for outside call.

Press a line key or dial a code to access a trunk. Refer to Central Office Calls, Placing on page 2-195 for more
information.
2. Dial

.
3. Dial your Account Code (1~16 digits, using 0~9 and
#
).
4. Dial

.
5. Dial number you want to call.

If you hear “stutter” dial tone after dialing the number, ARS is requesting you to enter an ARS Authorization
Code. Refer to the
Automatic Route Selection on page 2-83 feature for more information on ARS Authorization
Codes.
To enter an Account Code at a single line telephone:
1. Access trunk for outside call.

You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for more information.
2. Dial

.
3. Enter Account Code (1~16 digits).
4. Dial

.
5. Dial number you want to call.

If you hear “stutter” dial tone after dialing the number, ARS is requesting you to enter an ARS Authorization
Code. Refer to the
Automatic Route Selection on page 2-83 feature for more information on ARS Authorization
Codes.