NEC ELECTRA ELITE IPK II, User Manual

Page: 988 / 1190

Document Revision 4C Electra Elite IPK II
2 - 964 Tandem Trunking (Unsupervised Conference)
2. Press Hold to place the first trunk call on hold.
3. Place a second trunk call.
4. Hang up.

This sets up an Unsupervised Conference with both outside parties.

The line keys for the trunks light solid red.

To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press line key +

3 or the service code set of
Forced Trunk Disconnect in PRG 11-10-26).
Single Line Telephone
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press hookflash.
3. Place or answer second trunk call.
4. To set up the tandem call, hang up.

This sets up a Conference between both outside parties.

To disconnect the Conference, use Forced Trunk Disconnect [i.e., Dial the trunk access code ( # 9 + trunk
number) +

3 or the service code set of Forced Trunk Disconnect in PRG 11-10-26].
Method D – Automatic Tandem Trunking Using Speed Dialing
To set Automatic Tandem Trunking:
1. Dial service code 733 (or the service code set for Set Automatic Transfer per Trunk).
2. Dial the desired trunk number (Trunk Number: 001~200).
3. Hang up.

The line key for the trunk is solid red as long as the Unsupervised Conference continues.

To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press the line key or # 9 plus the trunk number
+

3 ).
To cancel Automatic Tandem Trunking:
1. Dial service code 734 (or the service code set for Disable Automatic Transfer per Trunk).
2. Dial the desired trunk number (Trunk Number: 001~200).
3. Hang up.

To disconnect the Conference, Forced Trunk Disconnect (i.e., Press the line key or # 9 plus the trunk

3 or the service code set of Forced Trunk Disconnect in PRG 11-10-26).