NEC ELECTRA ELITE IPK II, User Manual

Page: 1160 / 1190

Document Revision 4C Electra Elite IPK II
3 - 16 Codes Tables
Department Calling 650 + 0 (install) or
1 (remove)
Log in (0) or log out (1) for your
Department Calling Group 46
Department Step
Calling
#
Step Call through a Department Group 36
Dial Pad Confirmation
Tone
724 Enable/disable Dial Pad
Confirmation Tone -
Directed Call Pickup

+ ext. Pick up a call ringing or waiting at an
extension -
Do Not Disturb 747 +
0 (Cancel)
1 (Trk calls)
2 (Paging, ICM, Call
Forwards, and Transfers)
3 (All calls)
4 (Call Forwards)
Activate Do Not Disturb -
Door Box 702 + Door Box (1~4 or 1~8) Place a call to a door Box -
722 Forward a Door Box off-premise -
E911 786 Turn off the E911 alarm -
Flash
#
3 Flash a trunk from a single line telephone -
Forced Trunk
Disconnect

3 (after
#
9 + 1~8 or 001~200
+ busy)
Disconnect a call in progress on a trunk -
Group Call Pickup

#
Pick up a call ringing an extension in your
own pickup group (except Ring Group
calls) 24
768 + pickup group (1~8 or
1~9 or 01~64)
Answer a call ringing a telephone in
another pickup group 26 + group
769 Answer a call ringing a telephone in
another pickup group if you do not know
the group number (except Ring Group
calls) 25
Handsfree
Answerback/Forced
Intercom Ringing
1 (Off-Hook) Change the signaling mode of your
outgoing Intercom call -
721 Enable Handsfree Answerback for
incoming Intercom calls -
723 Enable Forced Ringing for incoming
Intercom calls -
Table 3-3 Service Codes by Feature (Continued)
For this feature... Dial this Service Code...
1
When you...
Also see
Function
Key...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker key first).