NEC ELECTRA ELITE IPK II, User Manual

Page: 335 / 1190

Electra Elite IPK II Document Revision 4C
Digital Voice Mail 2 - 311

15-02-38 Multiline Telephone Basic Data Setup – Voice Mail Message Wait Lamp Cycle (Version
1600 or higher required)
1 = Cycle 1
2 = Cycle 2 (default)
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7

15-03-01 Single Line Telephone Basic Data Setup – SLT Signaling Type
For each Electra Elite IPK II voice mail extension, this option must be set to 0.

15-03-03 Single Line Telephone Basic Data Setup – Terminal Type
Set all SLIU ports used for Voice Mail as type 1.

15-03-09 Single Line Telephone Basic Data Setup – Caller ID Function - for External Module
This option must be set to 0 when voice mail is used or the integration code for the disconnect
function is incorrect.

15-07-01 Programmable Function Keys
Assign a Voice Mail key to an extension. You must enter the Voice Mail key code (code 77)
followed by:

Your own extension number if you are setting up your own Voice Mail key.

A virtual extension number if you are setting up a Message Center key for a virtual extension.

A co-worker’s extension number if you are setting up a Message Center key for an installed
extension.

An uninstalled extension number if you are setting up a Message Center key for an uninstalled
extension.
(Optional) Assign a Voice Mail Record key to an extension (code 78).
(Optional) Assign a Personal Answering Machine Emulation key (code 91).
(Optional) Use a Call Redirect key (49) to allow a user to transfer a call to another extension or
voice mail without answering the call.

16-02-01 Department Group Assignment for Extensions
Put all the Voice Mail extensions in a unique Department Group (do not use Department Group
1). No other extensions should be in this group. This allows DILs to Voice Mail to ring other
Voice Mail extensions when the DIL assigned port is busy. Only one Voice Mail group is allowed
per system. Be sure to set up the Department Group in order. (For example, the first extension
should be order 1, the second order 2, etc.)

20-02-09 System Options for Multiline Telephones – Disconnect Supervision
Enable (1) disconnect supervision for the system.

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to the voice mail extensions. Using COS 14 is recommended
for all time modes.

20-09-02 Class of Service Options (Incoming Call Service) – Caller ID Display
Set these options to 1 for the voice mail COS.