NEC ELECTRA ELITE IPK II, User Manual

Page: 732 / 1190

Document Revision 4C Electra Elite IPK II
2 - 708 Message Waiting
This option is not available with a networked voice mail – the voice mail must be local.
Refer to the Voice Mail Integration (Analog) on page 2-1057 feature for the feature operation.
LED Color Indication
The software allows you to select whether the Message Wait LED located at the top of the multiline
terminal flashes green (0) or red (1) when a Message Wait indication is flashing. By default, this option is
set to flash red.
 If this LED is also used for voice mail indications (no Programmable Function Key programmed for voice
mail), if there are both voice mail messages and Message Wait indications, the color set for Message Wait
overrides the color used for voice mail indications (red).
Conditions

Reminder messages require a DSP daughter board for VRS messages.

Analog ports from APA or APR adapters do not provide Message Waiting lamps.

When a user responds to a Message Waiting, the system does not cancel the Message
Waiting indication if the called party uses Handsfree Answerback. The system cancels the
indication only if the called party lifts the handset or presses Speaker.

With the Hotel/Motel set up, an employee with a multiline terminal can send a Message
Waiting to a room telephone if allowed in system programming.

A Message Waiting key simplifies this feature operation.

Reminder messages require a DSP daughter board for Voice Response System (VRS).

Telephone-to-telephone Message Waiting works when the voice mail is installed.

The MW (Message Waiting) LED may be used to indicate voice mail messages if no
extension number is assigned to the voice mail key in system programming.

If the following programs are changed while the phone is online, a reset of the feature is
required before the setting takes effect.

PRG 15-02-35 Message Waiting Lamp Cycle for Calling Extension

PRG 15-02-36 Message Waiting Lamp Cycle for Called Extension

PRG 15-02-37 Voice Mail Message Wait Lamp Color

PRG 15-02-38 Voice Mail Message Wait Lamp Cycle

If both Voice Mail Message and Message Wait indication is set, the color set for Message
Wait overrides the color used for Voice Mail Message indication.