NEC ELECTRA ELITE IPK II, User Manual

Page: 945 / 1190

Electra Elite IPK II Document Revision 4C
Station Message Detail Recording 2 - 921

SMDR requires a connection to the CPUII via a COM port, CTA/CTU or LAN connection.
The system can also use a connection to the system via a CTA/CTU adapter (the CTU
adapter also requires a USB driver). Once you designate a CTA or CTU for SMDR, you
cannot use that extension for placing and answering other data calls. SMDR and the
Traffic Reports should not use the same CTA/CTU.

If no answer is received, NO ANSWER is displayed regardless of the system programing
for the Caller ID display option.

The setting in Program 35-02-18 works regardless of the entry in Program 35-02-15 or
35-02-17.

When Program 35-02-18 is set to 1, the first and second lines are sometimes separated.
When the buffer is full, the overflowed data may not be shown.

The special characters used in the Electra Elite IPK II system cannot be output to the
SMDR – they are converted to _.

To use the PBX Call Reporting option, program system for behind PBX operation.

Traffic Management Reports and SMDR should not use the same CTA/CTU port.

SMDR can be output to eight simultaneous devices. One SMDR Port can be set to the KSU
COM port and one SMDR Port can be set for to the LAN port. The remaining six outputs
can be set to different CTA/CTU adapters.
Default Setting
Disabled
System Availability
Terminals
All Stations
Required Component(s)
Software License