NEC ELECTRA ELITE IPK II, User Manual

Page: 835 / 1190

Electra Elite IPK II Document Revision 4C
Private Line 2 - 811
Private Line
Description
A Private Line is a trunk reserved for a multiline terminal for placing and answering calls. A user with a
Private Line always knows when important calls are for them. Additionally, the user has their own trunk
for placing calls that is not available to others in the system.
Conditions

Incoming Only – The multiline terminal has a Private Line only for incoming calls. The user
cannot place calls on the Private Line.

Outgoing Only – The multiline terminal has a Private Line only for outgoing calls. The
Private Line does not ring for incoming calls.

Both Ways – The multiline terminal has a Private Line for both incoming and outgoing calls.

Private Lines do not follow Call Forwarding if not Direct Inward Line (DIL).

Other programmed options for outgoing calls also affect a Prime Line.

Calls to extensions with DND active do not follow Call Forwarding programming. Direct
Inward Line (DIL) calls ring an idle Department Group member, then follow 22-08
programming then 22-05 programming.

An extension user can have Line Preference options applied to their Private Line.

A Private Line can also be a Prime Line.

You should always program a line key for each Private Line.

Private Lines are available on single line telephones.

Private Lines follow normal Toll Restriction.

An extension user can transfer their Private Line. Since other users have hold access, the
destination can answer the transferred Private Line and place it on Hold.

NEC does not recommend assigning ringdown to a private line.
Default Setting
Disabled