NEC ELECTRA ELITE IPK II, User Manual

Page: 1169 / 1190

Electra Elite IPK II Document Revision 4C
Codes Tables 3 - 25
Call Forwarding,
Immediate
Code: 10
Operation: Press key +
Dest. Extension
Call Forward Immediate to
extension or Voice Mail Slowly flashes red 741
Call Forwarding, No
Answer
Code: 12
Operation: Press key +
Dest. Extension
Call Forward No Answer to
extension or Voice Mail Slowly flashes red 743
Call Forwarding / Do
Not Disturb Override
Code: 37
Operation: Call
ext Press key
Override an extension Call
Forward or Do Not Disturb None -
Callback /
Camp-On/ Trunk
Queuing
Code : 35
Operation: Call busy
extension or access busy
trunk + Press key
Leave a Call back request at
a busy extension, Camp-On
to a busy extension, or
Queue for a busy trunk On red when
activated
#
Call Redirect Code : 49 + extension or
voice mail
Operation: Press key
Redirect a ringing call to the
predefined destination On red when
activated
-
Central Office Calls Code:

01 + Trunk
number (001~200)
Operation: Press key
Press a line key to place or
answer a trunk call (where
trunks are 001~200) On green when
seized, on red
when in use (by
other party), Slow
Flash green when
ringing, Hold flash
when on Hold
#
9
Conference
Code:
07
Operation:
Set up call +
Press key + set up call to
add + Press key twice
Set up a Conference or a
Meet Me Conference On red during setup
#
1
Data
Communications
Code: 66
Operation: Press key +
ext or outside number
Place a data call On red when call
set up
-
Department Calling Code: 46
Operation: Press Key
Log in or log out of your
Department Calling Group
On when removed,
Off when installed
650
Department Step
Calling
Code: 36
Operation: Dial busy ext
+ Press key
Step Call through a
Department Group for an idle
member None 2
Direct Station
Selection /
One-Touch Calling
Code: 01
Operation: Press key +
dest. ext. or outside tel.
#
+ Hold
Call an extension or outside
number using a DSS key Off = extension idle
On = extension busy
Flashing = DND
-
Do Not Disturb Code : 03
Operation: Press key +
code (0~4)
Set your telephone in DND DND key on red 747
Table 3-4 Function Key Codes by Feature (Continued)
To program a key, press the Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
press the key and enter the code (e.g., 48 for Voice Over).
For this feature... Use this key... When you... Key Lamp Status
Also See
Srvc Code