NEC ELECTRA ELITE IPK II, User Manual

Page: 123 / 1190

Electra Elite IPK II Document Revision 4C
Barge-In 2 - 99

11-16-02 One-Digit Service Code Setup – Barge-In
Set up Item 02 for single digit Barge-In. For example, you can assign Item 02 to use digit 5 for
Barge-In. This allows you to program a function key with an extension number plus the Barge-In
code (i.e., 5). This allows one-touch access to Barge-In for an extension.

15-07-01 Programmable Function Keys
Assign a function key for Barge-In (code 34 ).

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.

20-13-10 Class of Service Options (Supplementary Service) – Barge-In Monitor
For extension Class of Service, enable the Barge-In Speech Mode (0) or Monitor Mode (1) at the
initiating extension (i.e., Barge-In initiator).

20-13-15 Class of Service Options (Supplementary Service) – Barge-In, Initiate
Enable (1)/Disable (0) Barge-In at the initiating extension (i.e., Barge-In initiator).

20-13-16 Class of Service Options (Supplementary Service) – Barge-In, Receive
Enable (1)/Disable (0) Barge-In at the receiving extension (i.e., Barge-In receive).

20-13-17 Class of Service Options (Supplementary Service) – Barge-In Tone/Display (Intrusion
Tone)
Enable (1)/Disable (0) the Barge-In (Intrusion) Tone. If disabled, this also turns off the Barge-In
display at the called extension.

20-13-32 Class of Service Options (Supplementary Service) – Multiple Barge-Ins
Enable (1)/Disable (0 the extension user ability to have multiple users Barge-In to their
conversation.

20-14-11 Class of Service Options for DISA/E&M – DISA/Tie Trunk Barge-In
Enable (1)/Disable (0 a DISA or tie trunk user from using the Barge-In feature with the service
code defined in Program 11-12-08.

20-18-07 Service Tone Timers – Intrusion Tone Repeat Time
After a user barges in, the system repeats the Barge-In tone after this time.

21-01-03 System Options for Outgoing Calls – Trunk Interdigit Time (External)
Program the time an extension must wait before the Barge-In feature can be used on a call (this
time must expire before a call is put in a talk state). This time also affects Voice Over.
Operation
To Barge-In after calling a busy extension:
 The time in PRG 21-01-03 must expire before you can Barge-In.
1. Call a busy extension.
2. Press Barge-In key (PRG 15-07-01 or SC 751: 34).