NEC ELECTRA ELITE IPK II, User Manual

Page: 223 / 1190

Electra Elite IPK II Document Revision 4C
Central Office Calls, Placing 2 - 199

15-02-01 Multiline Telephone Basic Data Setup – Display Language Selection
Select the language used on a multiline terminal display:

15-02-08 Multiline Telephone Basic Data Setup – Automatic Handsfree
Determine if when a One Touch/DSS key is pressed on the extension phone it automatically
dials (1), or is preselected (0) and you have to go off-hook to dial.

15-03-03 Single Line Telephone Basic Data Setup – Terminal Type
Enter 1 for this option to allow a single line port to receive DTMF tones after the initial call setup.
Enter 0 to have the port ignore DTMF tones after the initial call setup. For Voice Mail, always
enter 1 (e.g., receive DTMF tones).

15-06-01 Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
Trunk Access Maps: 1~200

15-07-01 Programmable Function Keys
To simplify placing calls, assign function keys for placing trunk calls: Line keys (code

01 +
trunk), Trunk Group keys (code

02 + group), Call Appearance (CAP) Keys (code

08 + key # ).
Trunks: 1~200

20-02-06 System Options for Multiline Telephones – Preselection Time
Set the preselection time (0~64800 seconds). When a multiline terminal user preselects a line
key, the system remembers the preselection for this time.

20-02-09 System Options for Multiline Telephones – Disconnect Supervision
Enable (1)/Disable (0) disconnect supervision for the system trunks.

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to extensions.

20-07-12 Class of Service Options (Administrator Level) – Trunk Port Disable
For each Class of Service (1~15), enable (1)/disable (0) an extension user ability to use the
Trunk Port Disable feature.

20-08-02 Class of Service Options (Outgoing Call Service) – Trunk Outgoing Calls
Enable (1)/Disable (0) trunk calling.

20-13-13 Class of Service Options (Supplementary Service) – Continued Dialing (DTMF) Signal on
ICM Call
Enable (1)/Disable (0) an extension user ability to use Continued Dialing which allows DTMF
signal sending while talking on extension.
0 = Japanese 5 = Spanish 10 = Swedish
1 = English 6 = Dutch 11 = Turkish
2 = German 7 = Portuguese 12 = Latin American Spanish
3 = French 8 = Norwegian
4 = Italian 9 = Danish