Fig. 7: Measuring Pinion Gap
STARTER INNER PARTS INSPECTION
Armature
1. Verify that there is no continuity between the commutator and the core at each segment using a tester.
z
If there is continuity, replace the armature.
Fig. 8: Checking Continuity Between Commutator And Core At Each Segment Using Tester
2. Verify that there is no continuity between the commutator and the shaft using a tester.
z
If there is continuity, replace the armature.
Fig. 9: Checking Continuity Between Commutator And Shaft Using Tester
2007 Mazda CX-9 Grand Touring
2007 ENGINE Starting System (MZI-3.5) - CX-9
Microsoft
Sunday, November 15, 2009 9:28:57 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
