been recorded?
2
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
z
Verify related Service Bulletins
and/or on-line repair information
availability.
z
Is any related Service Bulletins
available?
Yes
Perform repair or diagnosis according to
the available Service Bulletins.
z
If the vehicle is not repaired, go to
the next step.
No
Go to the next step.
3
INSPECT APP SENSOR
CONNECTOR FOR POOR
CONNECTION
z
Turn the ignition switch off.
z
Disconnect the APP sensor
connector.
z
Inspect for poor connection (such
as damaged/pulled-out pins,
corrosion).
z
Are there any malfunction?
Yes
Repair or replace suspected part, then go to
Step 7.
No
Go to the next step.
4
INSPECT APP SENSOR NO.2
CIRCUIT FOR SHORT TO
GROUND
z
Turn the ignition switch off.
z
Inspect for continuity between the
following terminals:
{
APP sensor terminal F and
body ground.
{
APP sensor terminal D and
body ground.
{
APP sensor terminal G and
body ground.
{
APP sensor terminal C and
body ground.
{
APP sensor terminal H and
body ground.
z
Are there continuity?
Yes
Repair or replace suspected part, then go to
Step 7.
No
Go to the next step.
5
INSPECT APP SENSOR NO.2
z
Inspect APP sensor No.2.
(see
ACCELERATOR PEDAL
Yes
Replace the accelerator pedal, then go to
Step 7.
(see
ACCELERATOR PEDAL
REMOVAL/INSTALLATION [MZI-
3.5]
.)
2007 Mazda CX-9 Grand Touring
2007 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.5) - CX-9
Microsoft
Sunday, November 15, 2009 9:26:39 AM
Page 429
© 2005 Mitchell Repair Information Company, LLC.
