7. Refill with the following type and amount of the engine oil.
Engine oil capacity (approx. quantity)
Oil replacement: 4.7 L {5.0 US qt, 4.2 Imp qt}
Oil and oil filter replacement: 5.2 L {5.5 US qt, 4.6 Imp qt}
Engine oil specification
ENGINE OIL SPECIFICATION
8. Install the oil filler cap.
9. Start the engine and confirm that there is no oil leakage.
z
If there is oil leakage, repair or replace the applicable part.
10. Inspect the oil level. (See
ENGINE OIL LEVEL INSPECTION [MZI-3.5]
.)
OIL PRESSURE INSPECTION [MZI-3.5]
1. Disconnect the negative battery cable.
NOTE:
z
The amount of residual oil in the engine can vary according to factors
such as the replacement method and oil temperature. Verify the oil
level after engine oil replacement.
Item
U.S.A. and CANADA
Except U.S.A. and CANADA
Engine oil grade
Engine oil viscosity
5W-20
WARNING:
z
Hot engines and engine oil can cause severe burns. Turn off the
engine and wait until it and the engine oil have cooled.
z
A vehicle that is lifted but not securely supported on safety stands is
dangerous. It can slip or fall, causing death or serious injury. Never
work around or under a lifted vehicle if it is not securely supported
on safety stands.
z
Continuous exposure to USED engine oil has caused skin cancer in
laboratory mice. Protect your skin by washing with soap and water
immediately after working with engine oil.
2007 Mazda CX-9 Grand Touring
2007 ENGINE Lubrication (MZI-3.5) - CX-9
Microsoft
Sunday, November 15, 2009 9:32:52 AM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
