LSIS XBF-PN04B, User Manual, Page: 599 / 820

Chapter 9 Functions
9-172
9.5.12 Speed, Acceleration/Deceleration Override
To change the operating speed or the acceleration/deceleration rate of the positioning control currently in
operation, use the speed acceleration/deceleration override command. (XSETOVR/XPM_SETOVR)
(3) Control Characteristics
(a) The speed acceleration/deceleration override command can be used only in accelerating sections or
during constant speed sections of operation. Available operation commands are: End operation,
continuous operation, and consecutive operation.
(b) Multiple executions are possible during an operation.
(c) You can set the speed override value as "designate %" or
designate speed" in the speed override of the common parameter.
(d) Setting Related Parameters (Common Parameter)
Category Setting values Description
Speed
override
0: Designate %
Designates the setting value of speed override as a % of the set
speed.
1: Designate speed
Designates the setting value of speed override directly as the
driving speed.
(e) Setting Secondary Data of the Speed Override Command
Category Setting values Description
Speed
1
– 65,535 (1= 0.01%)
If speed override is set as "Designate%", specify the
percentage. (E.g. Set 10,000 for 100%)
1 - speed limit value
If speed override is set as "Designate speed", specify the
driving speed.
(4) Movement timing
(a) Command