LSIS XBF-PN04B, User Manual, Page: 173 / 820

Chapter 6 Command
6-73
(d) Point start step data will be set like item below depending on the leading no. of device.
No. Device No. POINT start step data
1 0 POINT start step data 1
2 1 POINT start step data 2
3 2 POINT start step data 3
4 3 POINT start step data 4
5 4 POINT start step data 5
6 5 POINT start step data 6
7 6 POINT start step data 7
8 7 POINT start step data 8
9 8 POINT start step data 9
10 9 POINT start step data 10
11 10 POINT start step data 11
12 11 POINT start step data 12
13 12 POINT start step data 13
14 13 POINT start step data 14
15 14 POINT start step data 15
16 15 POINT start step data 16
17 16 POINT start step data 17
18 17 POINT start step data 18
19 18 POINT start step data 19
20 19 POINT start step data 20
(e) Step data must be set in point start data area before execute point start.
(f) For detail description of point start operation, refer to “9.2.18 Positioning Start (4) Point Start”.
(g) The example program above sets 10 point steps from D03000 on axis1 and executes point start to 5 point
steps which already set.
(h) It is possible to set point operation step with PUT command. At that time, refer to memory address of “5.1.1
Point Operation Step Data” and “6.1.2 Internal Memory Writing”. If apply PUT to the example program above,
refer to follows.