Gerber OMEGA CP, Reference Manual

Page: 721 / 826

707
In Gerber Queue Manager, right-click the installed ODYSSEY plotter device name. A drop
down menu appears. Click Print/Cut to open the Target Acquisition Options dialog box. Set the
number of shuffles in the Before Acquisition Shuffle Vinyl control box. The recommended
number of shuffles is 1 and the maximum number is 10. Turn on Skew Control during Shuffle,
Acquisition, and Cutting. If you are not having success returning to Target 1 during
Acquisition, try different Shuffle and Skew settings.
Setting Target Acquisition Options for the ODYSSEY plotter
You can set limits on the following ODYSSEY plotter settings: Shuffle Speed, Shuffle
Acceleration, Acquisition Speed and Acquisition Acceleration in this dialog box. Use the
examples in the dialog box below as guidelines, but experimentation may give you results that
are better for your system. After adjusting your settings, use the control pad on the ODYSSEY
plotter to align the targets.
To set options for the ODYSSEY plotter
1
Click Start > Programs > GSP OMEGA > GQMgr to open the Gerber Queue Manager
program.
2
Right-click the installed ODYSSEY plotter device name. A drop-down menu appears.
3
Click Print/Cut to open the Target Acquisition Options dialog box.
4
Set the number of shuffles you want in the Before Acquisition Shuffle Vinyl control
box. The recommended number of shuffles is 1.
5
Accept the default limits for Speed and Acceleration Settings or enter new ones.
6
Click OK to return to the Gerber Queue Manager work space.
To capture targets using the ODYSSEY plotter
1
Use the slew keys on the plotter control panel to position the eyepiece or Illuminated
Target Locator over target #1.
2
Press Capture when you have captured target #1. The plotter repositions the target
locator close to the next target #.
3
Repeat Steps 1 and 2 until all the targets used in the job have been captured.