Gerber OMEGA CP, Reference Manual

Page: 149 / 826

135
3
Choose the Size Type.
4
Choose the position to Size From.
5
If you are sizing uniformly, enter the percentage in Size %. If you are sizing non-
uniformly there are two Size % boxes to enter both the height and length percentages.
6
Click OK.
Tip: You can also select objects in the Layer Tree and right-click to display the context menu
where you can select Shape > % Size to open the Percent Size dialog box.
Slanting
You can change the slant of shapes or text visually or precisely by a specific number of degrees.
Visually slanting
Visually slant shapes or text by selecting and dragging on the work surface.
To visually slant an object
1
Click the object to select it, then click a second time to display the slant arrows.
2
Click and drag either of the horizontal or vertical slant arrows to change the slant.
Tip: Turn on Layout > Grid or Layout > Snap to Guidelines for more control.
Changing the slant a specific number of degrees
Precisely slant shapes or text a specific number of degrees in the Absolute Slant dialog box. The
top and bottom Anchor Point option buttons anchor the shape so that the slant is left or right.
The right and left Anchor Point option buttons anchor the shape so that the slant is up and
down (a slant Y effect). The degree range of slant is -89
°
to +89
°
.
To slant an object a specific number of degrees
1
Select an object.
2
Click Shape > Absolute Slant to open the Absolute Slant dialog box.