Gerber OMEGA CP, Reference Manual

Page: 667 / 826

653
Chapter 59:
Working with Oversized Jobs
A job that exceeds the size that can be processed in one piece on a plotter or printer is
automatically divided into panels. GSPPlot inserts horizontal cutlines when the job exceeds the
vinyl height of a printer or plotter. When using a sheet-fed or flatbed plotter, GSPPlot
automatically inserts vertical cutlines when the job length exceeds the material length.
In the Panel Setup dialog box, you can modify cutline locations, choose which panels to process,
and control the printing or cutting of panels.
Creating panels
You can create panels in a job for ease of handling, by adding cutlines (even if other cutlines
already exist).
There are two methods for adding cutlines. Use the rulers to assist you in precisely positioning
cutlines.
To create panels by adding horizontal cutlines
1
Click Layout > Horizontal Cutline.
2
A scissors pointer will appear. Using the mouse, move the scissors pointer to locate a
cutline and click to set it.
To create panels by adding vertical cutlines
1
Layout > Vertical Cutline. A scissors pointer will appear.
2
Using the mouse move the scissors pointer to locate a cutline and click to set it.
Tip: Click in the horizontal or vertical ruler to drag in a cutline. Release the mouse button to
set it.