manualshive.com logo in svg

Gerber OMEGA CP, Reference Manual

Share
Download
Gerber OMEGA CP Reference Manual Download Page 345

  

331 

 
 

Exporting to WordPerfect Graphic File Format (WPG) 

The WordPerfect Graphic File Format (WPG) filter 
creates WPG files. In the Export dialog box, turn on 
Convert text to curves and click Options to open 
the WPG Output Filter Setup dialog box. Files may 
be exported to the WPG format with the following 
limitations: 

♦

 

Color shifts may occur. Record CMYK 
values assigned in Composer and reassign 
the values when opening the WPG file in 
an image editor. 

♦

 

Gradient fills export as solid color fills. 

Choose from the following available options to modify export settings: 

Profiles 

Only the Standard Options profile is currently available. 

Color Translations 

Choose the color format for export. 

♦

 

Normal

 exports color without modification from the plot file. 

♦

 

Inverse

 filters the colors and replaces them with the negative (or inverse) color value. 

For example, if an object is filled with 0% cyan, 100% magenta, 25% yellow, and 25% 
black, the inverted image will contain 100% cyan, 0% magenta, 75% yellow, and 75% 
black. 

♦

 

Inverse Grays Only

 filters gray scale colors and replaces them with the negative color 

value. All other colors export without modification. 

♦

 

Gray Scale

 filters the colors and replaces them with a shade of gray (from white to 

black) that represents their luminosity. 

♦

 

Inverse Gray Scale

 filters the colors and replaces them with a shade of gray (from 

white to black) that represents the opposite luminosity. 

Line Mode 

♦

 

Device

 uses the line style and width that the display and printer are capable of 

producing. 

♦

 

Stroked

 recreates thick lines and patterned lines as polygons to more closely represent 

the original artwork. 

Fill Mode 

♦

 

Device 

uses fill styles that the printer is capable of producing.

 

♦

 

Stroked 

recreates fills that most closely match the original artwork.

 

Summary of Contents for OMEGA CP



























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands