manualshive.com logo in svg

Gerber OMEGA CP, Reference Manual

Share
Download
Gerber OMEGA CP Reference Manual Download Page 368

354     

Chapter 31: 

 

Working with Images 

 

  To change image resolution and bits per pixel in for all images in the job 

 

1 

In Composer, click Tools > Options to open the Options dialog box. 

 

2 

Click the Images tab. 

 

3 

Use the Resolution slider to change the image resolution to Low, Medium, or High. 

 

4 

Use the slider to change the Bits per Pixel to 1, 2, 4, 8, or 24. 

 

5 

Click Apply. 

 

6 

Click OK. 

Changing the location of IMO files 

When rendering an image, OMEGA creates multiple Image Object (IMO) files; one for each 
process color and one for the image rotation that is required when printing on a Gerber thermal 
printer. IMO files are stored in C:\Seppath. Due to the size of IMO files, deleting these files 
periodically is recommended. 

You may want to save IMO files for jobs that are used repeatedly. It is a good idea to save these 
files in a separate folder to avoid inadvertently deleting them.  

  To change the separations path 

 

1 

In Composer, select the placeholder or the image. 

 

2 

Click the Image Fill tool to open the Image Fill dialog box.  

 

3 

Click Info to display additional image path information to the Image Fill dialog box. 

 

Summary of Contents for OMEGA CP



























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands