Atmel ATSAML22G16A-AUT, Manual

Page: 850 / 1231

36.8.9. Event Control
Name: EVCTRL
Offset: 0x20
Reset: 0x00000000
Property:
PAC Write-Protection, Enable-Protected
Bit 31 30 29 28 27 26 25 24
MCEO3 MCEO2 MCEO1 MCEO0
Access R/W R/W R/W R/W
Reset 0 0 0 0
Bit 23 22 21 20 19 18 17 16
MCEI3 MCEI2 MCEI1 MCEI0
Access R/W R/W R/W R/W
Reset 0 0 0 0
Bit 15 14 13 12 11 10 9 8
TCEI1 TCEI0 TCINV1 TCINV0 CNTEO TRGEO OVFEO
Access R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
CNTSEL[1:0] EVACT1[2:0] EVACT0[2:0]
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 10 – CNTEO: Timer/Counter Event Output Enable
This bit is used to enable the counter cycle event. When enabled, an event will be generated on begin or
end of counter cycle depending of CNTSEL[1:0] settings.
Value Description
0 Counter cycle output event is disabled and will not be generated.
1 Counter cycle output event is enabled and will be generated depend of CNTSEL[1:0] value.
Bit 9 – TRGEO: Retrigger Event Output Enable
This bit is used to enable the counter retrigger event. When enabled, an event will be generated when the
counter retriggers operation.
Value Description
0 Counter retrigger event is disabled and will not be generated.
1 Counter retrigger event is enabled and will be generated for every counter retrigger.
Bit 8 – OVFEO: Overflow/Underflow Event Output Enable
This bit is used to enable the overflow/underflow event. When enabled an event will be generated when
the counter reaches the TOP or the ZERO value.
Atmel SAM L22G / L22J / L22N [DATASHEET]
Atmel-42402E-SAM L22G / L22J / L22N_Datasheet_Complete-07/2016
850