Bit 0 – BUSERR: Bus Error
This bit indicates that an illegal bus condition has occurred on the bus, regardless of bus ownership. An
illegal bus condition is detected if a protocol violating start, repeated start or stop is detected on the I
2
C
bus lines. A start condition directly followed by a stop condition is one example of a protocol violation. If a
time-out occurs during a frame, this is also considered a protocol violation, and will set BUSERR.
If the I
2
C master is the bus owner at the time a bus error occurs, STATUS.ARBLOST and INTFLAG.MB
will be set in addition to BUSERR.
Writing the ADDR.ADDR register will automatically clear the BUSERR flag.
Writing '0' to this bit has no effect.
Writing '1' to this bit will clear it.
This bit is not write-synchronized.
Atmel SAM L22G / L22J / L22N [DATASHEET]
Atmel-42402E-SAM L22G / L22J / L22N_Datasheet_Complete-07/2016
736
