41.8.20. Result
Name:
RESULT
Offset:
0x24
Reset:
0x0000
Property:
-
Bit
15
14
13
12
11
10
9
8
RESULT[15:8]
Access
R
R
R
R
R
R
R
R
Reset
0
0
0
0
0
0
0
0
Bit
7
6
5
4
3
2
1
0
RESULT[7:0]
Access
R
R
R
R
R
R
R
R
Reset
0
0
0
0
0
0
0
0
Bits 15:0 – RESULT[15:0]: Result Conversion Value
These bits will hold up to a 16-bit ADC conversion result, depending on the configuration.
In single conversion mode without averaging, the ADC conversion will produce a 12-bit result, which can
be left- or right-shifted, depending on the setting of CTRLC.LEFTADJ.
If the result is left-adjusted (CTRLC.LEFTADJ), the high byte of the result will be in bit position [15:8],
while the remaining 4 bits of the result will be placed in bit locations [7:4]. This can be used only if an 8-bit
result is needed; i.e., one can read only the high byte of the entire 16-bit register.
If the result is not left-adjusted (CTRLC.LEFTADJ) and no oversampling is used, the result will be
available in bit locations [11:0], and the result is then 12 bits long. If oversampling is used, the result will
be located in bit locations [15:0], depending on the settings of the Average Control register.
Atmel SAM L22G / L22J / L22N [DATASHEET]
Atmel-42402E-SAM L22G / L22J / L22N_Datasheet_Complete-07/2016
1027
