Atmel ATSAML22G16A-AUT, Manual

Page: 580 / 1231

30.8.3. Interrupt Enable Clear
This register allows the user to disable an interrupt without doing a read-modify-write operation. Changes
in this register will also be reflected in the Interrupt Enable Set register (INTENSET).
Name: INTENCLR
Offset: 0x10
Reset: 0x00000000
Property:
PAC Write-Protection
Bit 31 30 29 28 27 26 25 24
Access
Reset
Bit 23 22 21 20 19 18 17 16
EVD7 EVD6 EVD5 EVD4 EVD3 EVD2 EVD1 EVD0
Access R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8
Access
Reset
Bit 7 6 5 4 3 2 1 0
OVR7 OVR6 OVR5 OVR4 OVR3 OVR2 OVR1 OVR0
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bits 23:16 – EVDn: Event Detected Channel n Interrupt Enable [n = 7..0]
Writing '0' to this bit has no effect.
Writing '1' to this bit will clear the Event Detected Channel n Interrupt Enable bit, which disables the Event
Detected Channel n interrupt.
Value Description
0 The Event Detected Channel n interrupt is disabled.
1 The Event Detected Channel n interrupt is enabled.
Bits 7:0 – OVRn: Overrun Channel n Interrupt Enable[n = 7..0]
Writing '0' to this bit has no effect.
Writing '1' to this bit will clear the Overrun Channel n Interrupt Enable bit, which disables the Overrun
Channel n interrupt.
Value Description
0 The Overrun Channel n interrupt is disabled.
1 The Overrun Channel n interrupt is enabled.
Atmel SAM L22G / L22J / L22N [DATASHEET]
Atmel-42402E-SAM L22G / L22J / L22N_Datasheet_Complete-07/2016
580