Dell S6100, Руководство по настройке

Страница: 1145 / 1743

With the
not-advertise
parameter configured, you can use this command to filter out some external routes.
For example, if you want to redistribute static routes to OSPF, but you don't want OSPF to advertise routes with
prefix 1.1.0.0, you can configure the summary-address 1.1.0.0 255.255.0.0 not-advertise to filter out all the routes fall
in range 1.1.0.0/16.
Related Commands
• area range — summarize routes within an area.
timers spf
Set the time interval between when the switch receives a topology change and starts a shortest path first (SPF) calculation.
Syntax timers spf delay holdtime msec
To return to the default, use the no timers spf command.
Parameters
delay Enter a number as the delay. The range is from 0 to 2147483647. The default is 5
seconds .
holdtime Enter a number as the hold time. The range is from 0 to 2147483647. The default is 10
seconds .
msec Enter the keyword
msec
to specify the time interval value in milli seconds.
NOTE: If you do not specify the msec option, the timer values are considered
as seconds.
Defaults
• delay = 5 seconds
• holdtime = 10 seconds
Command Modes ROUTER OSPFv2
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.11.0.0 Introduced the keyword
msec
.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Open Shortest Path First (OSPFv2 and OSPFv3) 1145