Dell S6100, Руководство по настройке

Страница: 146 / 1743

stack-unit location-led
Toggle the stack unit location LED on or off.
Syntax stack-unit stack-unit-number location—led {module module-number {off | on} |
off | on}
Parameters
stack-unit stack-
unit-number
Enter the keywords
stack-unit
and the stack unit number.
module module-
number
Enter the keyword
module
then the module number to enable location LED for the
particular module. The module number range is from 1 to 4.
on | off Turn the stack unit location LED on or off.
Default
None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100–ON and S5000.
9.8(1.0) Introduced on the Z9100–ON.
Example
Dell#stack-unit 1 location-led module 1 on
telnet
Connect through Telnet to a server. The Telnet client and server in Dell Networking support IPv4 and IPv6 connections. You can establish a
Telnet session directly to the router or a connection can be initiated from the router.
Syntax telnet { host | ip-address | ipv6-address prefix-length | vrf vrf instance name }
[/source-interface]
Parameters
host Enter the name of a server.
ip-address Enter the IPv4 address in dotted decimal format of the server.
ipv6-address prefix-
length Enter the IPv6 address in the x:x:x:x::x format then the prefix length in the /x format. The
range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
vrf instance (Optional) Enter the keyword
vrf
then the VRF instance name.
146 Control and Monitoring