Dell S6100, Руководство по настройке

Страница: 1277 / 1743

policy-map-input
Create an input policy map.
Syntax policy-map-input policy-map-name cpu-qos | [layer2] [cpu-qos]
To remove an input policy map, use the
no policy-map-input policy-map-name cpu-qos |
[layer2] [cpu-qos]
command.
Parameters
policy-map-name Enter the name of the
policy map
in character format (32 characters maximum).
cpu-qos Enter the
cpu-qos
keyword to assign this ACL to control plane traffic only.
layer2 (OPTIONAL) Enter the keyword
layer2
to specify a Layer 2 Class Map. The default is
Layer 3 .
cpu-qos (OPTIONAL) Enter the keyword cpu-qos to create an input policy to be used to rate-limit
control-plane traffic (CoPP).
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Expanded to add support for Layer 2.
6.1.1.1 Introduced on the E-Series.
Quality of Service (QoS) 1277