Dell S6100, Руководство по настройке

Страница: 1019 / 1743

ip-address (OPTIONAL) Enter the IP address in dotted decimal format of the RPF neighbor.
distance (OPTIONAL) Enter a number as the distance metric assigned to the mroute. The range is
from 0 to 255.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
E-Series legacy
command
Related Commands
• show ip mroute — display the routing table.
ip multicast-limit
To limit the number of multicast entries on the system, use this feature.
Syntax ip multicast-limit [vrf vrf-name ] limit
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
followed by the name of the VRF to limit the
number of multicast on the VRF.
limit Enter the desired maximum number of multicast entries on the system. The range is from
1 to 16000.
Defaults The default is 4000.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Multicast 1019