Version
Description
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.8.0
Added output for LSA throttling timers.
8.3.7.0
Introduced on the S4810.
7.9.1.0
Added support for VRF.
7.8.1.0
Added support of Multi-Process OSPF.
7.8.1.0
Added the
process-id
option, in support of Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre- 6.1.1.1
Introduced on the E-Series.
Usage Information
If you delete all the network area commands for Area 0, the
show ip ospf
command output does not list Area
0.
The following describes the
show ip ospf
command shown in the following example.
Line Beginning
with
Description
“Routing Process...”
Displays the OSPF process ID and the IP address associated with the process ID.
“Supports only...”
Displays the number of Type of Service (TOS) rouse supported.
“SPF schedule...”
Displays the delay and hold time configured for this process ID.
“Convergence
Level”
“Min LSA....”
Displays the intervals set for LSA transmission and acceptance.
“Number of...”
Displays the number and type of areas configured for this process ID.
Example
Dell# show ip ospf 10
Routing Process ospf 10 with ID 1.1.1.1 Virtual router default-vrf
Supports only single TOS (TOS0) routes
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Convergence Level 0
Min LSA origination 0 msec, Min LSA arrival 1000 msec
Min LSA hold time 5000 msec, Max LSA wait time 5000 msec
Number of area in this router is 1, normal 1 stub 0 nssa 0
Area BACKBONE (0)
Number of interface in this area is 1
SPF algorithm executed 205 times
Area ranges are
Dell#
Related Commands
•
— display information about the OSPF routes configured.
•
— display the OSPF interfaces configured.
•
— display the OSPF neighbors configured.
Open Shortest Path First (OSPFv2 and OSPFv3)
1113
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...