Dell S6100, Руководство по настройке

Страница: 1195 / 1743

•
range
= inclusive range of ports (you must specify two ports for the port command
parameter.)
source port Enter the keywords
source-port
then the port number to be matched in the ACL rule
in the ICAP rule
destination-port Enter the keywords
destination-port
then the port number to be matched in the
ACL rule in the ICAP rule.
source-port-range Enter the keywords
Source-port-range
then the range of the start port to end port
to be matched in the ACL rule in the ICAP rule.
destination-port-
range Enter the keywords
destination-port-range
then the range of the start port to
end port to be matched in the ACL rule in the ICAP rule.
Defaults none
Command Modes REDIRECT-LIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for the track-id on the S4810, S4820T, S6000, S6000-ON, and Z9000.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
show cam pbr
Display the PBR CAM content.
Syntax show cam pbr {interface interface | stack—unit slot-number port-set number
[pipeline number ]} [summary]
Parameters
interface interface Enter the keyword
interface
then the name of the interface.
stack–unit number Enter the keyword
stack-unit
then the slot number.
port-set number Enter the keywords port-set then the port-pipe number.
summary Enter the keyword
summary
to view only the total number of CAM entries.
pipeline number Enter the keyword
pipeline
and a number to which the interface belongs. The range is
from 0 to 3.
Policy-based Routing (PBR) 1195