Dell S6100, Руководство по настройке

Страница: 1282 / 1743

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information The default burst size is 100Kb. If a different value is required, you must configure the burst size to the required
value.
Related Commands
• rate police — specifies traffic policing on the selected interface.
• qos-policy-input — creates a QoS output policy.
rate-shape
Shape traffic output as part of the designated policy.
Syntax rate-shape [kbps | pps] peak-rate [ burst-kbps | burst-packets ] commited [kbps |
pps] commited-rate [ burst-kbps | burst-packets ]
Parameters
pps Enter the keyword
pps
to specify the rate limit in packets per second (pps).
kbps Enter the keyword
kbps
to specify the rate limit in Kilobits per second (Kbps). Make the
following value a multiple of 64. The range is from 0 to 100000000. The default
granularity is Megabits per second (Mbps).
burst-kbps (OPTIONAL) Enter the burst size in KB. The range is from 0 to 40000. The default is 100 .
burst-packets Enter the peak rate or committed rate burst size in packets per seconds.
Defaults Burst size is 10KB. Granularity for rate is Mbps unless you use the
kbps
option.
Command Modes QOS-POLICY-OUT
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
1282 Quality of Service (QoS)