Dell S6100, Руководство по настройке

Страница: 239 / 1743

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
mac access-group
Apply a MAC ACL to traffic entering or exiting an interface. You can apply a MAC ACL on a physical, port-channel, or VLAN interface.
Syntax mac access-group access-list-name {in [vlan vlan-range ] | optimized | out}
To delete a MAC access-group, use the
no mac access-group mac-list-name
command.
Parameters
access-list-name Enter the name of a configured MAC access list, up to 140 characters.
NOTE: This option is available only with the keyword
in
option.
vlan vlan-range (OPTIONAL) Enter the keyword
vlan
and then enter a range of VLANs. The range is
from 1 to 4094 (you can use IDs 1 to 4094).
NOTE: This option is available only with the keyword
in
option.
optimized Enter the keyword
optimized
to enable ACL optimization.
in Enter the keyword
in
to configure the ACL to filter incoming traffic.
out Enter the keyword
out
to configure the ACL to filter outgoing traffic.
NOTE:
1. If the MAC ACL is applied on VLAN, none of the VLAN members should have an access list applied for
that VLAN.
2. If the MAC ACL is applied on a Physical or Port Channel interface, the VLAN in which this port is
associated should not have an access list applied.
3. If the MAC ACL is applied on a VLAN, then that VLAN should not belong to VLAN ACL group.
4. If the MAC ACL is applied on a VLAN ACL group, then none of the VLANs in that group should have an
access list applied on it.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Access Control Lists (ACL) 239