Version
Description
7.8.1.0
Introduced on the S-Series.
Usage Information
If you use this command on a local VLT node, all multicast routes from the local PIM TIB, the entire multicast route
table, and all the entries in the data plane are deleted. The local VLT node sends a request to the peer VLT node to
download multicast routes learned by the peer. Both local and synced routes are removed from the local VLT node
multicast route table. The peer VLT node clears synced routes from the node.
If you use this command on a peer VLT node, only the synced routes are deleted from the multicast route table.
debug ip pim
View IP PIM debugging messages.
Syntax
debug ip pim [vrf
vrf-name
] [bsr | events | group | packet [in | out] |
register | state | timer [assert | hello | joinprune | register]]
To disable PIM debugging, use the
no debug ip pim [vrf
vrf-name
]
command or use the
undebug
all
to disable all debugging command.
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword
vrf
followed by the name of the VRF to view IP PIM
debugging messages corresponding to that VRF.
NOTE:
Applies to specific VRF if input is provided, else applies to Default
VRF.
bsr
(OPTIONAL) Enter the keyword
bsr
to view PIM Candidate RP/BSR activities.
events
(OPTIONAL) Enter the keyword
group
to view PIM messages for a specific group.
group
(OPTIONAL) Enter the keyword
group
to view PIM messages for a specific group.
packet [in | out]
(OPTIONAL) Enter the keyword
packet
to view PIM packets. Enter one of the optional
parameters:
•
in
: to view incoming packets
•
out
: to view outgoing packets
register
(OPTIONAL) Enter the keyword
register
to view PIM register address in dotted
decimal format (A.B.C.D).
state
(OPTIONAL) Enter the keyword
state
to view PIM state changes.
timer [assert | hello
| joinprune |
register]
(OPTIONAL) Enter the keyword
timer
to view PIM timers. Enter one of the optional
parameters:
•
assert
: to view the assertion timer
•
hello
: to view the PIM neighbor keepalive timer
•
joinprune
: to view the expiry timer (join/prune timer)
1200
PIM-Sparse Mode (PIM-SM)
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...