Dell S6100, Руководство по настройке

Страница: 558 / 1743

arp inspection-trust
Specify a port as trusted so that ARP frames are not validated against the binding table.
Syntax arp inspection-trust
Defaults Disabled
Command Modes
• INTERFACE
• INTERFACE PORT-CHANNEL
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
8.2.1.0 Introduced on the C-Series and S-Series.
Related Commands
• arp inspection — enable dynamic ARP inspection on a VLAN.
clear ip dhcp snooping
Clear the DHCP binding table.
Syntax clear ip dhcp snooping {binding | source-address-validation discard-counters
[interface
interface ]}
Parameters
binding
Clears the binding table.
558 Dynamic Host Configuration Protocol (DHCP)